济南力诺瑞特太阳能销售服务中心
地址:济南市天桥区粟山路76号(药山派出所对面)
电话:0531-85715890
手机:15665707182
网站:http://www.sdlntyn.com
联系人:江经理
当前位置:首页 - 产品知识产品知识
太阳能控制器接线步骤
来源:http://www.sdlntyn.com 发布时间:2016-4-27 11:26:13 浏览次数:637
1)检查控制器标识,核对规格型号数量是否为设计型号,如不符合应立即调货更换,不能勉强施
1) check the controller identification, check the specifications of the number of models for the design model, if not in conformity with the goods should be immediately transferred to replace, not reluctantly
工。
Work.
2)检查控制器表面是否有破损、划伤,有的话应立即更换。
2) check whether the surface of the controller is damaged or scratched, and some words should be replaced immediately.
3)接线前要认准控制器上,太阳电池组件、蓄电池、负载三者的标识符号,和正负极符号。
3) before connection to assign controller, solar battery module, battery and load the symbol, and positive and negative pole symbols.
灯杆吊装完成后进行控制器的接线,接线顺序为:蓄电池-太阳电池组件-光源。
Pole after lifting controller wiring, wiring order: Battery - solar cell module - light source.
5)按接线图进行串并联接线,不能私自改动连接方式,电线一般采用双芯护套铜软线,一般为红
5) according to the wiring diagram of the string and connecting wire, can not be without change connection mode, the twin core sheath soft copper wire is usually used in wire, usually red
黑两种颜色,红色作为正极,黑色作为负极,线芯为其他两种颜色的,深色的作为负极,另一个作为正极。
Black two colors, red as a positive, black as a negative, the line core for the other two kinds of color, dark as a negative, and the other as a positive.
6)接线通电后,按控制器说明书中指示,看控制器上显示(LED或LCD)是否正常,如有故障信
6) after connecting the power, according to the instructions of the controller instructions, see the controller on the display (LED or LCD) is normal, such as a fault letter
息,按说明书提示排除故障
Information, according to the instructions to exclude faults
本文来自:济南力诺瑞特太阳能更多精彩内容请点击我们的官方网站: http://www.sdlntyn.com我们将倾情为您解答。
This article from: Jinan Linuo Paradigma solar energy more exciting content, please click on our official website: http://www.sdlntyn.com we will lean the sentiment to answer your questions.