济南力诺瑞特太阳能销售服务中心
地址:济南市天桥区粟山路76号(药山派出所对面)
电话:0531-85715890
手机:15665707182
网站:http://www.sdlntyn.com
联系人:江经理
当前位置:首页 - 新闻中心新闻中心
太阳能电池板脏了处理及使用事项!
来源:http://www.sdlntyn.com 发布时间:2019-11-12 15:47:27 浏览次数:23
  日本冈山地区未来的机械公司还开发了一种便携式太阳能电池板清洁机器人,机器人长72厘米,宽4多少光伏3厘米,约11公斤体重,男人很容易提升,掌握了外壳上安装手柄,他们的机器人在数组的右下角打开开关,安装在前后的旋转刷,我们开始沿着面板向上跑去自主驾驶,使用内置的锂离子电池电源,无需电线,机器人向前直走,不会从面板框架上掉下来,机器人经过原来肮脏的面板变成独特的黑色光泽。
Japan's future machinery company in Okayama region has also developed a portable solar panel cleaning robot. The robot is 72cm long, 4cm wide and 3cm photovoltaic. It weighs about 11kg. It is easy for men to lift. They have mastered the installation of handle on the shell. Their robot turns on the switch at the lower right corner of the array and installs the rotary brush at the front and back. We start to run up the panel and drive independently, so that With the built-in lithium-ion battery power supply, the robot goes straight ahead without wires, and will not fall off the panel frame. The robot passes through the original dirty panel and becomes unique black luster.
1,不要安装的太阳能电池组件树,建筑,如阴影、离火或者易燃、装配结构应该能够适应环境的要求,请选择适当的材料和防腐处理,与一个强大的可以安装太阳能光伏发电组件,组件或从天上掉下来,将导致经济损失,组件不得拆卸,弯曲或组件,用好东西来避免危险动作,如组件。
1. Do not install solar cell module trees, buildings, such as shadow, off fire or flammable, assembly structure should be able to adapt to the requirements of the environment, please select appropriate materials and anti-corrosion treatment, with a powerful solar photovoltaic power generation module that can be installed or dropped from the sky, it will lead to economic loss, the module shall not be disassembled, bent or components, use good things to avoid dangerous actions, Such as components.
2. 修复和锁支架上的面板组装弹簧垫圈和平坦的垫片,安装太阳能面板应该以一个积极的角度大约30度,和面板组装应连接在一个适当的方法根据现场环境和支架结构的状态。
2. Repair and lock the panel assembly spring washer and flat gasket on the bracket, install the solar panel at a positive angle of about 30 degrees, and connect the panel assembly in a proper way according to the site environment and the status of the bracket structure.
3、面板组件应正确连接到接线盒在正负电极,输出电路应该正确地连接到设备,不能短连接到正负电极,以确保没有差距联合和绝缘接头,如果有差距会产生火花或电的影响。
3. The panel assembly shall be correctly connected to the junction box at the positive and negative electrodes, and the output circuit shall be correctly connected to the equipment instead of the short connection to the positive and negative electrodes, so as to ensure that there is no gap joint and insulation joint, and if there is a gap, sparks or electricity will be produced.

4. 对于分布式光伏发电,始终要检查升降结构是否脱离,必要时要拧紧各个部件,并检查各部件、每根导线、每根底线、插头的连接状态。

4. For distributed photovoltaic power generation, always check whether the lifting structure is separated, if necessary, tighten each component, and check the connection status of each component, each wire, each bottom line and plug.
5,经常用软布来测试组件的表面,如果确实更换25年(一般不需要替换)面板组件,应选择同一类型的组件使用相同的模型,不能接触到电缆连接器的一部分,如果真的需要,请使用安全设备(如绝缘手套)。
5. Always use soft cloth to test the surface of components. If the panel components have been replaced for 25 years (generally, they do not need to be replaced), select the same type of components and use the same model. Do not touch part of the cable connector. If necessary, use safety equipment (such as insulated gloves).
6. 在维修组件时,用不透明的物体或材料覆盖组件表面,因为组件在强光下会产生高压,这是非常危险的。该组件的保修期为3年。
6. When repairing components, cover the surface of components with opaque objects or materials, because components will generate high pressure under strong light, which is very dangerous. The warranty period of this component is 3 years.