济南力诺瑞特太阳能销售服务中心
地址:济南市天桥区粟山路76号(药山派出所对面)
电话:0531-85715890
手机:15665707182
网站:http://www.sdlntyn.com
联系人:江经理
当前位置:首页 - 新闻中心新闻中心
太阳能热水器工程水泵和电磁阀的设计原理
来源:http://www.sdlntyn.com 发布时间:2016-6-1 11:28:01 浏览次数:636
太阳能热水器工程水箱正常运转,离不开水泵与电磁阀。太阳能工程是离不开水泵的,一般用一台水泵完成多项工作,所以说太阳能热水工程离不开水泵,像一般的大型的太阳能热水器工程,一般情况下,使用3台水泵很平常,一台用来收集太阳热量,一台用来收集锅炉能量,再有一台用于供水管路的循环和加压。但是这3项工作所发生的时间段不相同,而且都是自水箱吸水,流经一定装置后,又回到水箱。一般条件好些的,预算比较足的,都是设计成一备一用双水泵设计。
The normal operation of the water tank of the solar water heater can not be separated from the water pump and the electromagnetic valve. Solar energy engineering is inseparable from the water pump, a water pump to perform a number of tasks, so that solar hot water project is inseparable from the water pump, like the general large-scale solar water heater project. Generally, using 3 sets of pumps are usually, a used to solar heat collection, a collection of boiler energy, again a for circulating water supply pipes and pressure. However, the time period of the 3 works is not the same, and it is the self water tank, after passing through a certain device, back to the water tank. General conditions are better, the budget is enough, are designed to prepare a double pump design.
水泵的工作,离不开的是电磁阀的配合,一般每个用水点或连接处,都会有一个是电磁阀,一般一条线路,都会用到一支电磁阀,所以就我们所知道的三条太阳能工程管路来说,必须要用到电磁阀,我们一般用3只电磁阀按照一定条件来开通或截断3条不同路径,也就一台水泵完成3项工作。
Pump work, cannot leave is electromagnetic valve, each point in the water or at the junction, there is a solenoid valve, general first line will use a solenoid valve, so we know three solar piping must be to use electric magnetic valve, we generally use three solenoid valve in accordance with certain conditions to open or cut off three different paths, a water pump completed work 3.
本文由济南太阳能售后服务中心向大家友情奉献.更多有关的知识请点击: http://www.sdlntyn.com我们将倾情为您解答.
This article from the Ji'nan solar energy service center to our friendship and dedication. More about the knowledge please click: http://www.sdlntyn.com we will give you the situation to answer.