济南力诺瑞特太阳能销售服务中心
地址:济南市天桥区粟山路76号(药山派出所对面)
电话:0531-85715890
手机:15665707182
网站:http://www.sdlntyn.com
联系人:江经理
当前位置:首页 - 新闻中心新闻中心
影响太阳能传感器的因素有哪些
来源:http://www.sdlntyn.com 发布时间:2016-4-1 14:02:09 浏览次数:620
1、一般将感温探头和水位探头都直接接触水源,漏水导致传感器失效,对水温检查也是有一定影响的。
1, the general temperature probe and water level probe are directly exposed to water, water leakage caused by the failure of the sensor, the water temperature is also a certain impact on the inspection.
2、水质、水垢都可以影响传感器水温水位检测,采集的数据不够精确,严重影响了控制器的控制精度。
2, the water quality and the scale effect of water temperature and water level sensor detection, data collection is not precise enough, serious impact on the control precision.
3、真空管的热量大,传给热水器水箱很多热量,使水箱温度能长时间达到100℃左右,短时间能达到130℃,甚至150℃,这就给传感器带来了耐高温问题。
3, the vacuum tube heat, pass to the water heater tank a lot of heat, so that the tank temperature can reach 100 degrees Celsius for a long time, a short time can reach 130 degrees Celsius, or even 150 degrees Celsius, which brings the high temperature resistance of the sensor problem.
4、高压线、低压线、信号塔等电磁干扰源,这对传感器的信号传输带来很大的影响,通常都使用电子模拟信号,虽然有滤波电路的保护,但还是不能达到理想的效果。
4, high-voltage, low-voltage line, signal tower source of electromagnetic interference, this transmission of a signal of the sensor has great influence, usually use electronic analog signal, although there is a filter circuit protection, but still can not achieve the ideal effect.
本文来自:老万燃气壁挂炉更多详细内容请点击:http://www.sdlntyn.com我们将倾情为您服务。
This article from: Lao Wan gas bigualu more details please click: http://www.sdlntyn.com we will love to serve you.