济南力诺瑞特太阳能销售服务中心
地址:济南市天桥区粟山路76号(药山派出所对面)
电话:0531-85715890
手机:15665707182
网站:http://www.sdlntyn.com
联系人:江经理
当前位置:首页 - 新闻中心新闻中心
太阳能电加热的正确使用
来源:http://www.sdlntyn.com 发布时间:2016-2-26 14:38:55 浏览次数:611
1.向水箱内加冷水
1 add cold water to the water tank
打开冷水阀、调温阀、冷水经冷水管、冷水阀、调温阀、上下水咀输入水箱、待溢流管有水溢出时,关闭冷水阀,则上水结束。
Open the cold water valve, thermostat valve, cold water in the cold water pipe, cooling water valve, regulating valve, under the faucet input water tank, to be an overflow pipe of the overflow of water, the cold water valve is closed, Sheung Shui end.
2.放热水洗浴
2 hot water bath
当水箱内水温达到洗浴温度时,打开热水阀、调温阀、喷淋头使温水流出供洗浴,如果喷淋头流出的水太热或太冷,通过调温阀和冷水阀来调节,到喷淋头流出的水温适宜为止。
When the water temperature in the water tank reaches the bath temperature, open a hot water valve, regulating valve, a spray head make warm water outflow for bathing, if spray head out of the water that is too hot or too cold and adjusted by temperature control valve and the cold water valve, suitable to the spray head out of water temperature so far.
3.电加热的使用
3 the use of electric heating
如遇雨雪天太阳光照弱,太阳能热水器中的水温达不到洗浴温度,则可插上电源插头,对水箱中的贮水进行辅助加热,到适宜洗浴的温度时,切断电源,再用水。操作时只要按下漏电保护插头按钮,电源指示灯亮(红色),电加热棒则开始工作,按下试验按钮,电源即被切断,电源指示灯灭,停止加热。
In case of rain and snow day the sun light intensity, water temperature in the solar water heater is not up to the bath temperature, you can plug in the power supply, the water stored in the water tank for auxiliary heating, to appropriate the bath temperature, cut off the power supply, and then water. When just press the leakage protection plug button, power indicator light (red), an electric heating rod is started to work, press the test button, the power supply is cut off, the power indicator lamp, stop heating.